IBM Netfinity 3000, User Handbook Manual

Page: 148 / 370

Installing or removing internal drives
Working with drives in bays 1 through 4
The following illustration shows the server bays.
Note: The front drive bay assembly is also known as the upper
drive bay assembly.
Attention:
The presence of 5 V ac standby power might result in damage to
your hardware unless you disconnect the power cord from the
electrical outlet before you open the server.
Before you begin:
Ÿ
Read “Electrical safety” on page 70 and “Handling
static-sensitive devices” on page 71.
Ÿ
Read the instructions that come with the drive that you want
to install or replace.
Ÿ
Position the server as described in “Accessing the system
board” on page 78.
.1/
Bay 1
.2/
Bay 2
.3/
Bay 3
.4/
Bay 4
.5/
Bay 5
.6/
Bay 6
114
Netfinity 3000 User's Handbook