IBM Netfinity 3000, User Handbook Manual, Page: 297 / 370

Normal ROM Operation ROM Recovery Mode
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON ON
OFF OFF
3. Move the switch to the ON position.
4. Insert the Flash BIOS Diskette (POST/BIOS update) into
drive A.
5. Turn on the server.
6. After the update session completes, turn off the server and
remove the diskette from drive A.
7. Move the switch back to the OFF position.
8. Reinstall the cover and reconnect any cables that you
disconnected.
9. Turn on the server to restart the operating system.
10. After changing configuration switch settings, you must
reconfigure the server. After reassembling the server (see
“Completing the installation” on page 148), use the
Configuration/Setup Utility program to reconfigure the server.
For more information, see “Using the Configuration/Setup
Utility program” on page 39.
Chapter 7. Server records and specifications
263