IBM Netfinity 3000, User Handbook Manual

Page: 75 / 370

Using the Configuration/Setup Utility program
Product Data
Select this choice to view the machine type and model, the system
serial number, the system board identifier, and the revision level or
issue date of the flash EEPROM (BIOS).
Devices and I/O Ports
Software recognizes ports from their port assignments. Each port
must have a unique port assignment. The Configuration/Setup
Utility program normally handles this, but you might have special
hardware or software that requires you to change these assignments.
Select the Devices and I/O Ports choice to view or change the
assignments for devices and input/output ports.
You can add serial ports by installing a serial adapter in an
expansion slot. See the documentation that comes with the serial
adapter for information about port assignments.
To display or change the port assignments:
1. From the Configuration/Setup Utility program menu, select
Devices and I/O Ports ; then, press Enter.
2. The Devices and I/O Ports menu appears.
3. Select a device or port. If necessary, press Enter to display an
additional menu.
4. Use the Left Arrow (
←
) or Right Arrow (
→
) key to advance
through the settings.
Chapter 3. Configuring your server
41