IBM Netfinity 3000, User Handbook Manual

Page: 114 / 370

Working with adapters
AGP adapters
You may install a video adapter in the dedicated AGP slot
connector, in an ISA slot connector, or in a PCI slot connector.
However, the server system board does not support the AGP video
connector and the integrated video subsystem simultaneously.
Your server contains one dedicated AGP slot connector on the
inside rear of the server wall, adjacent to the dual-inline memory
module (DIMM) connectors. To locate the dedicated AGP slot
connector, see “System Board Illustration” on page 253.
If you need to install an AGP adapter in the dedicated AGP slot
connector, go to “Installing or removing AGP adapters” on page 86.
If you need to install a video adapter in an ISA or PCI slot
connector, go to “ISA and PCI adapters.”
ISA and PCI adapters
Your server uses a riser card for expansion. The riser card contains
expansion slot connectors that connect adapters to the industry
standard architecture (ISA) and peripheral component interconnect
(PCI) buses.
You can install a variety of adapters in the expansion slot connectors
on the riser card. For information on locating the riser card, see
“System Board Illustration” on page 253. For an illustration of the
expansion slots that are located on the rear of the server, see
“Input/output connectors” on page 11.
The riser card in your server has three dedicated ISA slot connectors
and three dedicated PCI slot connectors.
80
Netfinity 3000 User's Handbook