IBM Netfinity 3000, User Handbook Manual

Page: 211 / 370

POST Messages
POST message Description
662 A diskette drive configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of diskette drives that you have installed.
If the drive information is not correct, change it. For
information on using the Configuration/Setup Utility
program, see “Using the Configuration/Setup Utility
program” on page 39.
2. If you installed or removed a diskette drive, you must save
the new configuration in the Configuration/Setup Utility
program. See “Using the Configuration/Setup Utility
program” on page 39 for information and instructions on
saving the configuration.
3. Run the diagnostic programs. (See “Running the diagnostic
test programs” on page 164 for information on running the
diagnostic programs that come with your server.)
If the problem persists, have the system serviced.
762 A math coprocessor configuration error occurred.
Action: Have the system serviced.
11xx A serial port error occurred.
The serial port number is identified by xx.
Action: Have the system serviced.
1762 A hard disk configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of hard disk drives that you have
installed. If the drive information is not correct, change it.
(For instructions on using the Configuration/Setup Utility
program, see “Using the Configuration/Setup Utility
program” on page 39.)
2. If you added or removed a hard disk drive, you must save
the new configuration in the Configuration/Setup Utility
program. See “Using the Configuration/Setup Utility
program” on page 39 for additional information and
instructions on saving the configuration.
If the problem cannot be isolated and corrected, have the system
serviced.
Chapter 5. Solving problems
177