IBM Netfinity 3000, User Handbook Manual, Page: 129 / 370

Working with adapters
4. Press the tab and pull the front fan forward until it clears the
server wall.
Tab
Hooks
5. Replace the front fan by aligning the two hooks on the bottom
of the front fan assembly with the slots on the server wall.
6. Insert the tab on the front fan assembly into the slot on the
server wall.
7. Connect the front fan cable to the connector on the riser card.
8. Replace the bottom cover (see “Removing and replacing the
bottom cover” on page 89).
9. If you want to install or remove any other options, do so now.
Otherwise, go to “Completing the installation” on page 148.
Chapter 4. Installing options
95