IBM Netfinity 3000, User Handbook Manual

Page: 164 / 370

Working with microprocessors
Note: The illustrations in this section might differ slightly
from your hardware.
c. Store the old microprocessor in a static-protective package.
3. Touch the static-protective package that contains the new
microprocessor to any unpainted metal surface in the server;
then, remove the new microprocessor.
4. Center the microprocessor
.1/
over the microprocessor
connector
.2/
. Make sure the microprocessor is oriented and
aligned correctly.
If the microprocessor has tabs at the upper corners instead of an
adapter with a handle, press inward on the retainer tabs until
they click into place.
130
Netfinity 3000 User's Handbook