IBM Netfinity 3000, User Handbook Manual

Page: 186 / 370

Completing the installation
7. If you have a modem or fax machine attached to the server, and
you are not in the United Kingdom, reconnect the telephone line
to the wall outlet and the server, and plug the power cords into
properly grounded electrical outlets.
If you are in the United Kingdom, plug in the power cords first;
then, connect the telephone line to the wall outlet and the
server.
8. Turn on the server and all attached devices.
Attention:
To allow for air circulation, be sure to maintain the following
minimum clearances around the server:
Ÿ
102 mm (4 in.) in the front
Ÿ
127 mm (5 in.) in the rear
Ÿ
51 mm (2 in.) on the left and right sides
What to do next?
When you have completed installing the covers and cables, go to
“Updating the server configuration” on page 153.
152
Netfinity 3000 User's Handbook