IBM Netfinity 3000, User Handbook Manual

Page: 180 / 370

Adding security options
1. Remove the server side cover (see “Disconnecting cables and
removing the side cover” on page 74).
2. Locate the two holes on the lower right edge of the rear of the
server.
3. Insert the U-bolt through the rear panel; then, attach and tighten
the nuts with an appropriately sized or adjustable wrench.
4. If you have completed installing the U-bolt and do not want to
install any other internal options, replace the server side cover
and reconnect all external cables and power cords. (See
“Completing the installation” on page 148 if you need
additional information.)
146
Netfinity 3000 User's Handbook