IBM Netfinity 3000, User Handbook Manual, Page: 74 / 370

Using the Configuration/Setup Utility program
Ÿ
A right arrowhead ( 5 ) beside a menu item indicates that a
configuration change occurred in that category. The
5
might
also appear in subsequent menus.
Ÿ
An asterisk (*) beside a menu item indicates that a resource
conflict exists.
To exit from the Configuration/Setup Utility program:
1. From the Configuration/Setup Utility program, select Exit Setup
or press Esc.
2. The Exit Setup menu appears. You can save your changes, exit
from the Configuration/Setup Utility program without saving
your changes, or return to the Configuration/Setup Utility
program menu. Use the arrow keys to select the desired option;
then, press Enter.
Note: The choices on some menus might differ slightly, depending
on the BIOS version that comes with your server.
Use the following commands to navigate through the screens and
make selections:
Key Function
↑ ↓
Move between menu items.
← →
Toggle between choices for a menu item.
Enter Select an item.
Esc Exit from a menu after viewing or making changes.
F1 Get help on a selected menu item.
System Summary
Select this choice to display configuration information, such as the
type and speed of the microprocessor, and the amount of memory.
Changes that you make to configuration settings appear on this
summary screen. You cannot edit the fields on this screen. If you
need to change the configuration settings, you must make the
changes from the applicable menu choices.
40
Netfinity 3000 User's Handbook