IBM Netfinity 3000, User Handbook Manual

Page: 123 / 370

Working with adapters
Removing and replacing the bottom cover
Attention:
The presence of 5 V ac standby power might result in damage to
your hardware unless you disconnect the power cord from the wall
before you open the server.
Before you begin:
Ÿ
Read “Electrical safety” on page 70 and “Handling
static-sensitive devices” on page 71.
Ÿ
Read the documentation that comes with the option.
To remove the bottom cover:
1. Remove the server side cover (see “Disconnecting cables and
removing the side cover” on page 74).
2. Position the server as described in “Accessing the system board”
on page 78.
3. Remove the screws from the bottom cover.
4. Pivot the end of the bottom cover away from the server frame.
Note: Your server bottom cover might look different from the
bottom cover in this illustration.
5. Slide the tabs on the end of the cover out of their openings and
remove the cover.
Chapter 4. Installing options
89