IBM Netfinity 3000, User Handbook Manual

Page: 147 / 370

Installing or removing internal drives
2. Choose the bay in which you want to install the drive. (Refer to
Table 3 on page 104 for the drive types and sizes available for
each bay.)
3. Access the appropriate drive bays.
Notes:
a. In all models, drive bays 1 and 4 come with drives
preinstalled.
b. In some models, drive bay 6 comes with a drive
preinstalled.
c. Drive bays 2 and 3 have a bay panel installed. Your server
might also come with a metal static shield installed in these
drive bays.
d. If you remove a drive that has removable media and you do
not intend to install a new drive immediately, reinstall the
bay panel for that bay.
To access drive bays 1 through 4, go to “Working with drives in
bays 1 through 4” on page 114.
To access drive bays 5 and 6, go to “Working with drives in
bays 5 and 6” on page 122.
4. Touch the static-protective bag containing the drive to any
unpainted metal surface on the server; then, remove the drive
from the bag.
5. Check the instructions that come with the drive, or contact your
IBM reseller or IBM marketing representative to see if you need
to set any switches or jumpers on the drive, or if you need to
attach a tray to the drive.
Chapter 4. Installing options
113