IBM Netfinity 3000, User Handbook Manual

Page: 128 / 370

Working with adapters
Removing and replacing the front fan
Attention:
The presence of 5 V ac standby power might result in damage to
your hardware unless you disconnect the power cord from the
electrical outlet before you open the server.
Before you begin:
Ÿ
Read “Electrical safety” on page 70 and “Handling
static-sensitive devices” on page 71.
Ÿ
Read the documentation that comes with the option.
To remove and replace the front fan:
1. Remove the server side cover (see “Disconnecting cables and
removing the side cover” on page 74).
2. Position the server as described in “Accessing the system board”
on page 78.
3. Disconnect the front fan cable from the riser card. See the label
inside the server for the location of the front fan connector, or
see the riser-card illustration in “ISA and PCI adapters” on
page 80.
94
Netfinity 3000 User's Handbook