IBM Netfinity 3000, User Handbook Manual, Page: 283 / 370

Recording installed devices
Table 14 (Page 4 of 4). Configuration/setup program defaults and changes
Option Default value New value Additional information
Plug and Play Control
Set Device Node [ Enabled ]
Address Decode [ 16-Bit ]
Plug and Play Operating System [ No ]
Processor Control
Processor 0 ID 0634
Processor Updating [ Enabled ]
ISA Legacy Resources
Memory Resources
I/O Port Resources
DMA Resources
Interrupt Resources
Power Management
ACPI BIOS Mode
[ Enabled ]
APM
4
[ Disabled ]
Automatic Power On
Wake on LAN
5
[ Disabled ]
Serial Port A Ring Detect
5
[ Disabled ]
Modem Ring Detect
5
[ Disabled ]
Wake Up on Alarm
5
[ Disabled ]
PCI Wake Up
5
[ Disabled ]
4
The Automatic Power Management (APM) feature is not used.
5
Do not change these values.
The following table shows the defaults for various monitors.
Table 15. Monitor default settings and changes
Option Default value New value Additional information
Monitor Horizontal
Frequency [ Not Used ]
Refresh Rate For
640x480 [ 60 Hz ]
Refresh Rate For
800x600 [ 60 Hz ]
Refresh Rate For
1024x768 [ 43 Hz interlaced ]
Refresh Rate For
1280x1024 [ 43 Hz interlaced ]
Refresh Rate For
1600x1200 [ 49 Hz interlaced ]
Chapter 7. Server records and specifications
249