director product manager user guide
4–3
Using Logs
Audit Log
The Audit Log displays a history of all configuration changes applied to the director
from any source such as HAFM, SNMP management stations, or host.
Figure 4–2: Audit Log
Some actions, such as backing up configuration data and enabling automatic
date/time synchronization, are performed only by the HAFM server without
director interaction. These actions are indicated when HAFM displays in the
Source column, as shown in
Figure 4–2
. If HAFM does not display, the time
stamp is from the director.
•
Date/Time—The date and time of the change on the director.
•
Action—User action that caused the configuration change, such as offline status,
port name change, or change of address.
•
Source—Identifies the user making the change through the Director Product
Manager and IP or DNS host name address of the remote user’s workstation.
— Maintenance Port—Change was made by a user connected to the maintenance
port.
— HAFM application—Change was made by a Product Manager user.
— SNMP—Change was made by a remote SNMP management station.
— Fabric—Change was initiated by another director in the fabric that is not
managed by this HAFM server.
— Web server—Change was made by a user through the Embedded Web Server
interface.
— Fibre channel Host—Change was made inband by a Fibre Channel host
through the open systems or FICON management server.
