manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

2–12

director product manager user guide

Monitoring and Managing the Director

The current date and time display in the Date and Time fields. If the Periodic 
Date/Time Synchronization field is checked, the Date and Time fields are 
disabled (grayed out).

To enable and disable Periodic Date/Time Synchronization, click the check box 
and then click Activate.

S/390 mode only. An error will result if periodic synchronization and clock alert 
mode are enabled.

Figure 2–6:  Configure Date and Time Periodic Synchronization dialog box

2. Perform one of the following steps:

•

To immediately synchronize the director date and time with the HAFM server, be 
sure the Periodic Date/Time Synchronization option is enabled and then click 
Sync Now.

NOTE:  If you enable the Periodic Date/Time Synchronization feature and click Activate, 
the time will synchronize at the next update period.

•

To set the director with a specific date and time, make sure that the Periodic 
Date/Time Synchronization field is not selected. Refer to 

Figure 2–7

. Enter the 

date and time, and then click Activate.

Figure 2–7:  Configure date and time (manually)

NOTE:  Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and 
seconds.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Native Instruments Scarbee Mark 1 User Manual preview
Scarbee Mark 1
Brand: Native Instruments Pages: 14
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
Avaya CPSEE_TSP500 User Manual preview
CPSEE_TSP500
Brand: Avaya Pages: 216
Bosch VIDOS Installation And Operating Manual preview
VIDOS
Brand: Bosch Pages: 40
Bosch Divar Archive Player Operation Manual preview
Divar Archive Player
Brand: Bosch Pages: 10
Bosch MBV-BPRO-40 Operator'S Manual preview
MBV-BPRO-40
Brand: Bosch Pages: 86
Bosch DINION IP 5000 MP Software Manual preview
DINION IP 5000 MP
Brand: Bosch Pages: 112
Kenwood ARCP-2000 Instruction Manual preview
ARCP-2000
Brand: Kenwood Pages: 21
Kenwood KDC-X8006U Instruction Manual preview
KDC-X8006U
Brand: Kenwood Pages: 40
Kenwood KDC-MP735U Instruction Manual preview
KDC-MP735U
Brand: Kenwood Pages: 52
Kenwood KDC-X891 Instruction Manual preview
KDC-X891
Brand: Kenwood Pages: 68
Tascam HS-P82 Release Note preview
HS-P82
Brand: Tascam Pages: 6
Southern Company My Link Manual preview
My Link
Brand: Southern Company Pages: 13
Source Technologies Ohioedge CRM+BPM User Manual preview
Ohioedge CRM+BPM
Brand: Source Technologies Pages: 36
Pfaff CREATIVE 4D EXPRESS MONOGRAM WIZARD Brochure preview
CREATIVE 4D EXPRESS MONOGRAM WIZARD
Brand: Pfaff Pages: 2
FieldServer FS-8700-39 Driver Manual preview
FS-8700-39
Brand: FieldServer Pages: 25
Qlogic QConvergeConsole CLI 2400 Series User Manual preview
QConvergeConsole CLI 2400 Series
Brand: Qlogic Pages: 366
MACROMEDIA FLEX-FLEX BUILDER Tutorial preview
FLEX-FLEX BUILDER
Brand: MACROMEDIA Pages: 56

Brands by name

Popular brands

Load more brands