2–16
director product manager user guide
Monitoring and Managing the Director
Symbols and Indicators
The following figure illustrates the status symbols and LED indicators that may
display on a port card in the Port Card View.
Figure 2–10: Port Card View
Refer to the following numbered list for the meaning of the status symbols and LED
indicators shown on the Port Card View in
Figure 2–10
. Port states are described in
detail under “
Port Operational States
” on
page 2–41
.
Displaying Port Information
Double-click a port or right-click on a port and choose Port Properties from the menu
to display the port’s Properties dialog box, as shown in
Figure 2–11
. Also display this
dialog box by:
•
When you double-click on a row in the Port List View or right-click on a row and
choosing Port Properties from the pop-up menu.
1
An amber LED (at the top of the card) that
illuminates if any port fails or blinks if FRU
beaconing is enabled.
2
A bank of amber and green LEDs above the ports.
One amber LED and one green LED are associated
with each port and indicate port status as follows:
•
The green LED illuminates (or blinks if there is
active traffic) and the amber LED extinguishes to
indicate normal port operation.
•
The amber LED illuminates and the green LED
extinguishes to indicate a port failure.
•
Both LEDs extinguish to indicate a port is
operational but not communicating with an
N_Port (no cable attached, loss of light, port
blocked, or link recovery in process).
•
The amber LED flashes and the green LED
either remains on, extinguishes, or flashes to
indicate a port is beaconing or running online
diagnostics.
3
Four duplex LC connectors for attaching fiber-optic
cables.
UPM
SHR-2274
3
1
2
