manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

6–7

Optional Features

•

You cannot disable Fabric Binding or Switch Binding if Enterprise Fabric Mode is 
enabled. However, if Enterprise Fabric Mode is disabled, you can disable Fabric 
Binding, Switch Binding, or both. 

Switch Binding

This feature is managed through the Switch Binding submenu options available on 
the Product Manager Configure menu. Using Switch Binding, you can specify 
devices and switches that can attach to director and switch ports. This provides 
security in environments that include a large number of devices by ensuring that only 
the intended set of devices attach to a switch or director. 

Configuring Switch Binding—Overview

To configure switch binding, you must first activate the feature using the Switch 
Binding State Change dialog box while selecting the type of port where you want to 
restrict connection (connection policy). Possible selections are E_Ports, F_Ports, or all 
types. 

If the director or switch is online, activating switch binding populates the Membership 
List in the Switch Binding - Membership List dialog box (Product Manager) with 
the following WWNs currently connected to the director or switch, depending on the 
connection policy set in the State Change dialog box:

•

WWNs of devices connected to F_Ports (F_Port connection policy). The WWN is 
the WWN of the attached device's port.

•

WWNs of switches connected to E_Ports (E_Port connection policy). The WWN 
is the WWN of the attached switch.

•

WWNs of devices connected to F_Ports and switches connected to E_Ports 
(all-ports connection policy).

Notes

•

When the Switch Binding feature is first installed and has not been enabled, the 
Switch Membership List is empty. When you enable Switch Binding, the 
Membership List is populated with WWNs of devices, switches, or both that are 
currently connected to the switch. 

•

If the switch is offline and you activate switch binding, the Membership List is not 
automatically populated. 

•

Edits to the Switch Binding Membership list will be maintained when you enable 
or disable Switch Binding.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

QMS VMS Software Manual preview
VMS
Brand: QMS Pages: 118
Canon PowerShot A530 Software User'S Manual preview
PowerShot A530
Brand: Canon Pages: 153
Canon PowerShot A420 Software User'S Manual preview
PowerShot A420
Brand: Canon Pages: 132
Canon PowerShot A460 Using Manual preview
PowerShot A460
Brand: Canon Pages: 135
Canon MultiPASS C50 Software User'S Manual preview
MultiPASS C50
Brand: Canon Pages: 198
Canon PowerShot A530 Software Starter Manual preview
PowerShot A530
Brand: Canon Pages: 98
Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
Yamaha M7CL StageMix V1.5 User Manual preview
M7CL StageMix V1.5
Brand: Yamaha Pages: 20
Yamaha LS9-16 Owner'S Manual preview
LS9-16
Brand: Yamaha Pages: 80
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
Nero Nero Express 9 Manual preview
Nero Express 9
Brand: Nero Pages: 76
NAPCO ISEEVIDEO Brochure preview
ISEEVIDEO
Brand: NAPCO Pages: 1
KIP KUWPD Operation Manual preview
KUWPD
Brand: KIP Pages: 22
Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
MACROMEDIA DRUMBEAT 2000 ECOMMERCE EDITION User Manual preview
DRUMBEAT 2000 ECOMMERCE EDITION
Brand: MACROMEDIA Pages: 238
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Brand: Nortel Pages: 90
Hitachi Universal Storage Platform VM Installation Planning Manual preview
Universal Storage Platform VM
Brand: Hitachi Pages: 62

Brands by name

Popular brands

Load more brands