manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

2–42

director product manager user guide

Monitoring and Managing the Director

Invalid 
Attachment

On

Off

Yellow 
Triangle

The director port is in an invalid attachment 
state in either of five cases: (1) a loopback 
plug is connected to the port and there is no 
diagnostic test running, (2) the fiber-optic 
cable is connected to another port on the 
same director, (3) the port type is configured 
as an F_Port and it is connected to another 
director (E_Port), (4) the port type is 
configured as an E_Port and is connected to 
an N_Port, or (5) a port binding violation has 
occurred due to an invalid entry in the 
Bound WWN column in the Configure 
Ports dialog box. Note: Ports can be 
configured as G_Ports, F_Ports, and 
E_Ports through the Configure Ports dialog 
box. 

Link 
Incident

Off

Off

Yellow 
Triangle

A link incident occurred on the port. The 
status symbol displays in the Port List View, 
Port Card View, and Hardware View.

Link Reset

Off

Off

Yellow 
Triangle

The director and the attached device are 
performing a link reset operation to recover 
the link connection. Ordinarily, this is a 
transient state that should not persist.

No Light

Off

Off

None

No signal (light) is being received on the 
director port. This is a normal condition when 
there is no cable plugged into the port or 
when the power of the device attached to the 
other end of the link is off.

Not 
Operational

Off

Off

Yellow 
Triangle

The director port is receiving the Fibre 
Channel not operational sequence (NOS) 
indicating that the attached device is not 
operational.

Table 2–1:  Port States and Indicators (Continued)

Port State

Port 

Indicators

Alert 

Indicator

Description

Green

Amber

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

EAW Resolution Introduction Manual preview
Resolution
Brand: EAW Pages: 36
Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Brand: Extreme Networks Pages: 264
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual preview
AlliedWare Plus 5.2.1
Brand: Allied Telesis Pages: 1294
American DJ myDMX 2.0 User Instructions preview
myDMX 2.0
Brand: American DJ Pages: 21
Nokia Series 60 Manual preview
Series 60
Brand: Nokia Pages: 84
PNY S-Cure User Manual preview
S-Cure
Brand: PNY Pages: 15
ZyXEL Communications IPSEC VPN CLIENT Brochure preview
IPSEC VPN CLIENT
Brand: ZyXEL Communications Pages: 2
Denon DP-200USB Brochure & Specs preview
DP-200USB
Brand: Denon Pages: 2
Fiery Fiery EX2101 Job Management Manual preview
Fiery EX2101
Brand: Fiery Pages: 214
FieldServer FS-8700-87 Driver Manual preview
FS-8700-87
Brand: FieldServer Pages: 10
Baby Lock Baby Lock Embroidery Professional PLUS Instructions preview
Baby Lock Embroidery Professional PLUS
Brand: Baby Lock Pages: 5
Janome Artistic Suite V6 Manual preview
Artistic Suite V6
Brand: Janome Pages: 5
IBM Hub/Switch Installation Manual preview
Hub/Switch
Brand: IBM Pages: 590
Nortel Symposium TAPI Service Provider for Succession 3.0 User Manual preview
Symposium TAPI Service Provider for Succession 3.0
Brand: Nortel Pages: 198
KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL...
Brand: KAPERSKY Pages: 93
KAPERSKY ADMINISTRATION KIT 6.0 Reference preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 229
KAPERSKY ANTI-VIRUS 5.6 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 130
Quantum GoVault 40GB Quick Start Manual preview
GoVault 40GB
Brand: Quantum Pages: 16

Brands by name

Popular brands

Load more brands