manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

A–17

Information and Error Messages

Installing this 
feature key, while 
online, will cause an 
IPL operation on the 
switch and a 
momentary loss of 
LAN connection. 
This operation is 
non-disruptive to 
the Fibre Channel 
traffic. Do you wish 
to continue 
installing this 
feature key?

If the switch is online, 
installing the new 
feature key will cause 
an internal program 
load (IPL). The LAN 
connection to the 
HAFM server will be 
lost momentarily, but 
Fibre Channel traffic 
will not be affected.

Click Yes to install the feature 
key or No to not install.

Internal file transfer 
error received from 
director.

The director detected 
an internal file 
transfer error.

Retry the operation. If the 
problem persists, contact the 
next level of support.

Invalid character in 
field.

An invalid character 
was entered in the 
data field.

Remove invalid characters 
from the entry.

Invalid 
configuration name.

Attempted to save an 
address configuration 
name with an invalid 
name.

Use up to 24 alphanumeric 
characters, including spaces, 
hyphens, and underscores.

Invalid feature key.

The feature key was 
not recognized.

Re-enter the feature key 
noting the key is case 
sensitive and to include the 
dashes.

Invalid firmware file.

The file selected for 
firmware download is 
not a firmware 
version file.

Choose the correct firmware 
version file and retry the 
operation.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

JETWAY MAGICTWINXP-R10 Software Install Manual preview
MAGICTWINXP-R10
Brand: JETWAY Pages: 43
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Brand: MAGIX Pages: 88
ACRONIS ADVANCED SERVER Datasheet preview
ADVANCED SERVER
Brand: ACRONIS Pages: 2
Quantum PX500 Series Installation Instructions Manual preview
PX500 Series
Brand: Quantum Pages: 26
Quantum Management Console 4.4 User Manual preview
Management Console 4.4
Brand: Quantum Pages: 120
VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
British Telecom Tyne Operating Instructions & User Manual preview
Tyne
Brand: British Telecom Pages: 4
Comdial GCA70-36 User Manual preview
GCA70-36
Brand: Comdial Pages: 32
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Brand: ARRI Pages: 46
Acroprint AcroComm Programming Manual preview
AcroComm
Brand: Acroprint Pages: 64
Dresser 5 Manual preview
5
Brand: Dresser Pages: 57
ArcSoft SHOWBIZ 2 User Manual preview
SHOWBIZ 2
Brand: ArcSoft Pages: 99
Cabletron Systems SmartCell ZX-250 Installation Manual preview
SmartCell ZX-250
Brand: Cabletron Systems Pages: 34
KAPERSKY ANTI-VIRUS 5.0 - FOR NOVELL NETWARE User Manual preview
ANTI-VIRUS 5.0 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 123
KAPERSKY ANTI-VIRUS 5.0 - FOR SENDMAIL WITH MILTER... Administrator'S Manual preview
ANTI-VIRUS 5.0 - FOR SENDMAIL WITH MILTER...
Brand: KAPERSKY Pages: 100

Brands by name

Popular brands

Load more brands