manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

4–9

Using Logs

— Not-operational (NOS) primitive sequence received. A NOS was recognized.

— Primitive sequence timeout. Link reset protocol timeout occurred. Timeout 

occurred for an appropriate response while in NOS receive state and after 
NOS is no longer recognized.

— Invalid primitive sequence received for the current link state. Either a link 

reset or a link reset response primitive sequence was recognized while waiting 
for the offline sequence.

For corrective actions in response to these link incident messages, refer to the 
diagnostics chapter in the hp StorageWorks director 2/64 service manual for the 
Director 2/64 and the hp StorageWorks director 2/140 service manual for the 
Director 2/140. 

Threshold Alert Log

This log provides details of threshold alert notifications. Besides the date and time that 
the alert occurred, the log also displays details about the alert as configured through 
the Configure Threshold Alerts option under the Configure menu on the menu bar.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

ICP ICP Controller Using Manual preview
ICP Controller
Brand: ICP Pages: 16
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Brand: Better Edge technology Pages: 121
Tascam HS-P82 Release Note preview
HS-P82
Brand: Tascam Pages: 6
Red Hat APPLICATION STACK 2.0 RELEASE Release Note preview
APPLICATION STACK 2.0 RELEASE
Brand: Red Hat Pages: 26
Red Hat NETWORK SATELLITE SERVER 4.0 Installation Manual preview
NETWORK SATELLITE SERVER 4.0
Brand: Red Hat Pages: 80
Red Hat NETWORK - USER REFERENCE GUIDE 3.1 User Reference Manual preview
NETWORK - USER REFERENCE GUIDE 3.1
Brand: Red Hat Pages: 78
Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT Reference Manual preview
NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT
Brand: Red Hat Pages: 300
Altigen Call Detail Reporting Manual preview
Call Detail Reporting
Brand: Altigen Pages: 97
Altigen Altiware OE 4.5 System Administration & Installation Manual preview
Altiware OE 4.5
Brand: Altigen Pages: 455
Symantec NORTON INTERNET SECURITY - FOR MAC V4 User Manual preview
NORTON INTERNET SECURITY - FOR MAC V4
Brand: Symantec Pages: 28
Symantec CONFLICTMANAGER Reference preview
CONFLICTMANAGER
Brand: Symantec Pages: 54
Denon DP-200USB Brochure & Specs preview
DP-200USB
Brand: Denon Pages: 2
F-SECURE MOBILE ANTI-VIRUS FOR SERIES 60 User Manual preview
MOBILE ANTI-VIRUS FOR SERIES 60
Brand: F-SECURE Pages: 90
A&D WinCT-Plus Instruction Manual preview
WinCT-Plus
Brand: A&D Pages: 36
Unibrain API-810 User Manual preview
API-810
Brand: Unibrain Pages: 77
Nikon Digital Cameras Reference Manual preview
Digital Cameras
Brand: Nikon Pages: 51

Brands by name

Popular brands

Load more brands