1–20
director product manager user guide
Product Manager Overview
— Threshold criteria. This includes configuring the threshold as the percent of
port traffic capacity utilized (% utilization), the time interval for measuring
throughput and sending notification, and the amount of cumulative minutes
that the % utilization should exist before an alert is generated.
•
Export Configuration Report—Choose this option to display the Export
Configuration Report dialog box, which enables you to specify a file name in
which to save an ASCII text file containing all current user-definable
configuration options in a printable format. Note that this file cannot be read back
into the Product Manager in order to set configuration parameters.
•
Enable Embedded Web Server—Choose this option by placing a check mark in
the check box to enable the Embedded Web Server Interface on the director.
Choose the option again to remove the check mark and disable the Embedded
Web Server Interface. When disabled, users at remote workstations cannot access
the interface.
If enabled, HP recommends changing the user names and/or passwords from their
default values to prevent unauthorized access.
•
Enable Telnet—Choose this option by placing a check mark in the check box to
enable telnet access to the director. Choose the option again to remove the check
mark and disable telnet access. When disabled, users at remote workstations
cannot access the director through telnet to use the Command Line Interface (CLI)
or perform other tasks.
Logs
The Logs menu on the menu bar displays the following options. For detailed
information on using these dialog boxes, refer to
Chapter 4
, “
Using Logs
.”
•
Audit Log—This log provides a record of all configuration changes made on the
director. Each entry displays the date and time of the change, a description of the
change, the source of the change (such as the HAFM server or SNMP
management station), and an identifier for the source, such as the IP address of the
HAFM server or SNMP management station.
•
Event Log—Choose this option to display the director event log. This log
provides a record of significant events that have occurred on the director, such as
hardware failures, degraded operation, and port problems. Each entry includes the
date and time of the event, a reason code for the event, the severity level, a brief
description, and up to 32 bytes of supplementary event data. Refer to the hp
StorageWorks director 2/64 service manual or hp StorageWorks director 2/140
service manual for more information.
