manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

xiii

About This Guide

This reference guide provides information to use when planning to acquire and install 
one or more of the following Hewlett-Packard (HP) StorageWorks products:

•

Director  2/64.

•

Director 2/140.

•

High Availability Fabric Manager (HAFM) application.

The Director 2/64 is a 64-port director, while the Director 2/140 is a 140-port director. 
Functions and options available through the Product Manager applications for these 
products are nearly identical. When there are differences, this guide will contain notes 
such as Director 2/64 only or Director 2/140 only.

Intended Audience

This publication is intended for use by configuration and installation planners; 
however, information is also provided for system administrators, customer engineers, 
and project managers.

Related Documentation

For a list of corresponding documentation included with this product, see the Related 
Documents section of the hp StorageWorks director release notes.

For the latest information, documentation, and firmware releases, please visit the HP 
StorageWorks website:

http://h18006.www1.hp.com/storage/saninfrastructure.html

For information about Fibre Channel standards, visit the Fibre Channel Industry 
Association website, located at 

http://www.fibrechannel.org

.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
altiris eXpress Altris eXpress Helpdesk Solution 5.6 SP1 User Manual preview
eXpress Altris eXpress Helpdesk Solution 5.6 SP1
Brand: altiris Pages: 143
Novell DATA SYNCHRONIZER Administration Manual preview
DATA SYNCHRONIZER
Brand: Novell Pages: 50
Xerox LaserWriter 8.x driver User Manual preview
LaserWriter 8.x driver
Brand: Xerox Pages: 12
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Brand: Yamaha Pages: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Brand: Yamaha Pages: 6
Yamaha Audio Owner'S Manual preview
Audio
Brand: Yamaha Pages: 7
Yamaha Arp Owner'S Manual preview
Arp
Brand: Yamaha Pages: 9
Yamaha AE041 Owner'S Manual preview
AE041
Brand: Yamaha Pages: 11
Yamaha Card Filer Manual preview
Card Filer
Brand: Yamaha Pages: 15
Yamaha Add-On Effects Manual preview
Add-On Effects
Brand: Yamaha Pages: 14
Yamaha AN200 Editor Manual preview
AN200 Editor
Brand: Yamaha Pages: 72
Yamaha 03DVEK Owner'S Manual preview
03DVEK
Brand: Yamaha Pages: 129
Acroprint ATR9800 Reference Manual preview
ATR9800
Brand: Acroprint Pages: 68
E-Mu 404 Tutorials Manual preview
404
Brand: E-Mu Pages: 42
UNIBLUE REGISTRYBOOSTER Quick Start Manual preview
REGISTRYBOOSTER
Brand: UNIBLUE Pages: 3
UNIBLUE POWERSUITE Quick Start Manual preview
POWERSUITE
Brand: UNIBLUE Pages: 4
FieldServer FS-8700-39 Driver Manual preview
FS-8700-39
Brand: FieldServer Pages: 25

Brands by name

Popular brands

Load more brands