1–2
director product manager user guide
Product Manager Overview
NOTE: The default user name for the right to view status and other information is
“operator.” The default user name for the right to modify configuration data, perform
maintenance tasks, or perform other options is “administrator.” The default password for
both user names is “password.”
•
The command line interface (CLI). The CLI allows you to access many HAFM
and Product Manager functions while entering commands during a telnet session
with the director. The primary purpose of the CLI is to automate management of a
large number of directors using scripts. The CLI is not an interactive interface; no
checking is done for pre-existing conditions and no prompts display to guide users
through tasks. Refer to the hp StorageWorks CLI reference guide for directors and
edge switches.
This guide provides details on the Product Manager applications for the HP
StorageWorks Director 2/64 and Director 2/140.
HAFM Management Menu Options
This user’s guide provides information on the StorageWorks Director 2/64 Product
Manager and Director 2/140 Product Manager application only. Information on the
HAFM application is provided in the hp StorageWorks ha-fabric manager user guide.
Following are lists of options available on the menu bar in the applications.
References are provided to the correct publication for detailed information on these
options.
HAFM
Following are options available through the HAFM. For more information, refer to
“Using the HAFM” in Chapter 2 of the hp StorageWorks ha-fabric manager user
guide.
View Tabs
•
Products
•
Fabrics
Product Menu
•
New
•
Open
•
Delete
•
Modify
