manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

A–13

Information and Error Messages

Director must be 
offline to configure.

Clock alert mode is 
enabled through the 
Configure FICON 
Management Server 
dialog box and user is 
attempting to enable 
Periodic Date/Time 
Synchronization 
through the 
Configure Date and 
Time dialog box.

Disable clock alert mode 
through the Configure 
FICON Management Server 
dialog box.

Disabling Insistent 
Domain ID will 
disable Fabric 
Binding. Do you 
want to continue?

Fabric Binding is 
enabled through 
HAFM and user 
attempted to disable 
Insistent Domain ID 
in the Configure 
Switch Parameters 
dialog box.

Click Yes if you want to 
continue and disable Fabric 
Binding.

Disabling Switch 
Binding will disable 
Enterprise Fabric 
Mode. Do you want 
to continue?

User attempted to 
disable Switch 
Binding through the 
Switch Binding 
State Change dialog 
box, but Enterprise 
Fabric Mode is 
enabled.

Disable Enterprise Fabric 
Mode through the Enterprise 
Fabric Mode dialog box 
before disabling Switch 
Binding.

Do you want to 
continue with IPL?

This message 
requests confirmation 
to initial program load 
(IPL) the director.

Click Yes to IPL the director 
or Cancel to cancel the 
operation.

Duplicate 
Community names 
require identical 
write 
authorizations.

Duplicate community 
names are entered at 
the Configure SNMP 
dialog box, and have 
different write 
authorizations.

Delete the duplicate 
community name or make the 
write authorizations 
consistent.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Canon PowerShot A590 IS Software User'S Manual preview
PowerShot A590 IS
Brand: Canon Pages: 49
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Brand: Alphasmart Pages: 4
Imation IronKey Workspace Provisioning Tool 1.0 User Manual preview
IronKey Workspace Provisioning Tool 1.0
Brand: Imation Pages: 19
NAPCO BADGING3000 Datasheet preview
BADGING3000
Brand: NAPCO Pages: 2
AMX I!-TIMEMANAGER Instruction Manual preview
I!-TIMEMANAGER
Brand: AMX Pages: 16
D-Link DS-605 - VPN Client - PC User Manual preview
DS-605 - VPN Client - PC
Brand: D-Link Pages: 15
D-Link DSN-210-SW - SureSync Continuous Data Protection Datasheet preview
DSN-210-SW - SureSync Continuous Data Protection
Brand: D-Link Pages: 4
D-Link D-View 5.1 Quick Installation Manual preview
D-View 5.1
Brand: D-Link Pages: 56
D-Link D-View 6 Professional User Manual preview
D-View 6 Professional
Brand: D-Link Pages: 143
D-Link PS Admin User Manual preview
PS Admin
Brand: D-Link Pages: 136
D-Link D-View 5.1 User Manual preview
D-View 5.1
Brand: D-Link Pages: 279
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Brand: Red Hat Pages: 26
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Brand: ARRI Pages: 46
ZyXEL Communications Auto Configuration Server Vantage Access Quick Start Manual preview
Auto Configuration Server Vantage Access
Brand: ZyXEL Communications Pages: 113
SAP DB:ODBC Manual preview
DB:ODBC
Brand: SAP Pages: 31
Denon DP-200USB Brochure & Specs preview
DP-200USB
Brand: Denon Pages: 2
Adaptec CDP-00278-02-A User Manual preview
CDP-00278-02-A
Brand: Adaptec Pages: 133

Brands by name

Popular brands

Load more brands