manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

A–2

director product manager user guide

Information and Error Messages

All configuration 
names must be 
unique.

All address 
configurations must 
be saved with unique 
names.

Save the configuration with a 
different name that is unique 
to all saved configurations.

All FPM ports will 
be held inactive 
while the director is 
configured to 
2 Gb/sec speed. Do 
you want to 
continue?

Occurs when FPM 
cards are installed in 
the director and 
director speed is 
being set to 2 Gb/sec 
in the Configure 
Operating 
Parameters dialog 
box.

Replace FPM cards with 
UPM cards (UPM cards 
operate at 1 and 2 Gb/sec) or 
set the director speed to 
1 Gb/sec.

All port names must 
be unique.

A duplicate Fibre 
Channel port name 
was configured. All 
port names must be 
unique.

Reconfigure the Fibre 
Channel port with a unique 
name.

Another Product 
Manager is 
currently 
performing a 
firmware install.

Only one instance of 
the Product Manager 
application can install 
a firmware version to 
the director at a time.

Wait for the firmware 
installation process to 
complete and try the 
operation again.

Are you sure you 
want to delete 
firmware version?

This message 
requests confirmation 
to delete a firmware 
version. Firmware 
library can store up to 
8 firmware versions.

Click Yes to delete the 
firmware version or No to 
abort the operation.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Sony Ericsson RS232 interface for GT47 embedded apps UART Application Note preview
RS232 interface for GT47 embedded apps UART
Brand: Sony Ericsson Pages: 14
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Brand: MAGIX Pages: 88
Barracuda Networks NG Network Access Client SP4 Migration Instructions preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 10
AMX I!-FTPSENDER Instruction Manual preview
I!-FTPSENDER
Brand: AMX Pages: 12
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
Hitachi Universal Storage Platform VM Installation Planning Manual preview
Universal Storage Platform VM
Brand: Hitachi Pages: 62
Hitachi Universal Storage Platform V Reference Manual preview
Universal Storage Platform V
Brand: Hitachi Pages: 102
Hitachi MK-96RD626-07 User Manual preview
MK-96RD626-07
Brand: Hitachi Pages: 205
Promise Technology FastTrak SX Series Version 4.4 User Manual preview
FastTrak SX Series Version 4.4
Brand: Promise Technology Pages: 102
AVG 9 INTERNET SECURITY - REVISED 6-2010 User Manual preview
9 INTERNET SECURITY - REVISED 6-2010
Brand: AVG Pages: 209
Adaptec CDP-00276-01-A User Manual preview
CDP-00276-01-A
Brand: Adaptec Pages: 45
Tech Source RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND Brochure preview
RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND
Brand: Tech Source Pages: 2
ICP Novell NetWare Using Manual preview
Novell NetWare
Brand: ICP Pages: 6
Wavecom GR64 Application Note preview
GR64
Brand: Wavecom Pages: 26
Samsung EASYGSM GH68-60751A Owner'S Manual preview
EASYGSM GH68-60751A
Brand: Samsung Pages: 14
IBM ViaVoice Simply Dictation for Mac OS X User Manual preview
ViaVoice Simply Dictation for Mac OS X
Brand: IBM Pages: 92
Epson 4012033-00 XXX User Manual preview
4012033-00 XXX
Brand: Epson Pages: 81
Epson A882401 User Manual preview
A882401
Brand: Epson Pages: 71

Brands by name

Popular brands

Load more brands