director product manager user guide
A–23
Information and Error Messages
No file was
selected.
Action requires the
selection of a file.
Select a file.
No firmware version
file was selected.
A file was not
selected in the
Firmware Library
dialog box before an
action, such as
modify or send was
performed.
Click on a firmware version in
the dialog box to select it,
then perform the action again.
No firmware
versions to delete.
There are no
firmware versions in
the firmware library to
delete, therefore the
operation cannot be
performed.
Informational message
only—no action is required.
Nonredundant
director must be
offline to install
firmware.
If the director has
only one CTP card,
the director must be
set offline to install a
firmware version.
Set the director offline and
install the firmware.
Not all of the optical
transceivers are
installed for this
range of ports.
Some ports in the
specified range do
not have optical
transceivers installed.
Use a port range that is valid
for the ports installed.
Performing this
action will overwrite
the date/time on the
director.
Warning that occurs
when configuring the
date and time
through the
Configure Date and
Time dialog box, that
the new time or date
will overwrite the
existing time or date
set for the director.
Verify that you want to
overwrite the current date or
time.
Table A–1: Product Manager Messages (Continued)
Message Description
Action
