manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

1–16

director product manager user guide

Product Manager Overview

•

Logs

•

Maintenance

•

Help

Product Menu

Choose one of the following options from the Product menu:

Port

This provides a secondary port menu only when the Port Card View, Port List 
View, or Performance View displays in the view panel. To use this menu for a 
specific port, click a port in the Port Card View, a port’s row in the Port List 
View, or a port’s bar graph in the Performance View. The menu contains options 
which are identical to those that display when you right-click the port, port row, or 
port bar graph in those views. For detail on these options refer to “

Using the Port 

Card View

” on 

page 2–15

.

FRU

Click an SBAR card, CTP card, port card, power supply module, or cooling fan 
module in the Hardware View only and choose FRU from the Product menu to 
display a menu of specific options for that FRU. These are the same menu option 
as when you right-click these components in the Hardware View. For details on 
these options refer to the following sections in “

Menu Options

” on 

page 2–36

:

•

Port Card Menu

•

CTP  Card  Menu

•

SBAR  Card  Menu

•

Cooling Fan and Power Supply

Clear System Error Light

Choose this to turn off the amber system error LED, located below the green 
power LED on the director front bezel.

Enable Unit Beaconing

Click the check box to toggle unit beaconing on or off. When the check box has a 
check mark, unit beaconing is on, and the amber system error light on the director 
front bezel blinks to help users locate the actual unit in an equipment room. When 

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

McDATA OPENconnectors Command Line Interface Manual preview
OPENconnectors
Brand: McDATA Pages: 170
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
NETGEAR GS110TP - ProSafe Gigabit Smart Switch Installation Manual preview
GS110TP - ProSafe Gigabit Smart Switch
Brand: NETGEAR Pages: 2
F-SECURE MOBILE SECURITY 80 Series User Manual preview
MOBILE SECURITY 80 Series
Brand: F-SECURE Pages: 39
Euphonix MixView 3.0 Overview preview
MixView 3.0
Brand: Euphonix Pages: 8
Native Instruments Monark Manual preview
Monark
Brand: Native Instruments Pages: 49
Cabletron Systems Element Manager 2.1 User Manual preview
Element Manager 2.1
Brand: Cabletron Systems Pages: 108
Canon 08011-41-UD2-003 Installation And Configuration Manual preview
08011-41-UD2-003
Brand: Canon Pages: 176
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Brand: JVC Pages: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Brand: JVC Pages: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Brand: JVC Pages: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Brand: JVC Pages: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Brand: JVC Pages: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Brand: JVC Pages: 50
JVC GZMG21US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG21US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Brand: Symantec Pages: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Brand: Seagate Pages: 2

Brands by name

Popular brands

Load more brands