manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

A–21

Information and Error Messages

Invalid value for 
month (1 - 12).

At the Configure 
Date and Time 
dialog box, the MM 
value (month) must 
be an integer from 1 
through 12 inclusive.

Verify and enter a valid date.

Invalid value for 
R_A_TOV.

At the Configure 
Operating 
Parameters dialog 
box, the resource 
allocation time-out 
value (R_A_TOV) 
must be an integer 
from 10 through 1200 
inclusive.

Verify and enter a valid 
number which must be 
between 10 through 1200.

Invalid value for 
second (0 - 59).

At the Configure 
Date and Time 
dialog box, the SS 
value (second) must 
be an integer from 0 
through 59 inclusive.

Verify and enter a valid time.

Invalid value for 
year.

At the Configure 
Date and Time 
dialog box, the YYYY 
value (year) must be 
a four-digit value.

Verify and enter a four-digit 
value for the year.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

DAVIS WeatherLink Addendum preview
WeatherLink
Brand: DAVIS Pages: 20
Olympus E-20 - Dual Monaural Earphones Software Installation Manual preview
E-20 - Dual Monaural Earphones
Brand: Olympus Pages: 2
F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61... Administrator'S Manual preview
INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...
Brand: F-SECURE Pages: 414
ScanSoft TextBridge PRO 8.5 User Manual preview
TextBridge PRO 8.5
Brand: ScanSoft Pages: 243
Campbell BMP5 Direct SDK Instruction Manual preview
BMP5 Direct SDK
Brand: Campbell Pages: 32
Aruba Networks ClearPass Guest 3.9 Deployment Manual preview
ClearPass Guest 3.9
Brand: Aruba Networks Pages: 518
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
CDML Advanced Calculator 2.2 User Manual preview
Advanced Calculator 2.2
Brand: CDML Pages: 48
DeLorme Topo North America User Manual preview
Topo North America
Brand: DeLorme Pages: 369
nordic edge ASA 5500 Installation Manual preview
ASA 5500
Brand: nordic edge Pages: 49
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78
GRASS VALLEY Concerto Instruction Manual preview
Concerto
Brand: GRASS VALLEY Pages: 174
Tech Source RAPTOR 1100T - X11R6.1 FOR AIX Installation Manual preview
RAPTOR 1100T - X11R6.1 FOR AIX
Brand: Tech Source Pages: 40
Intel Application Accelerator RAID Edition User Manual preview
Application Accelerator RAID Edition
Brand: Intel Pages: 85
GRASS VALLEY Aurora Edit Security Application Note preview
Aurora Edit Security
Brand: GRASS VALLEY Pages: 5
Qlogic SANsurfer FC HBA Manager User Manual preview
SANsurfer FC HBA Manager
Brand: Qlogic Pages: 152
MACROMEDIA COLDFUSION MX 61-DEVELOPING COLDFUSION MX Develop Manual preview
COLDFUSION MX 61-DEVELOPING COLDFUSION MX
Brand: MACROMEDIA Pages: 860

Brands by name

Popular brands

Load more brands