director product manager user guide
3–19
Configuring the Director
— Unblock all ports—Unblocks all port addresses that are currently blocked.
This allows communication from all port addresses in the switch.
— Clear all—Clears the prohibit and blocked status of all port addresses in the
switch.
•
CUP Name—This user-defined name is assigned to the control unit port (CUP).
Up to 24 alphanumeric characters allowed, including spaces, hyphens and
underscores. A space is not allowed as the first character, and the characters are
case-sensitive. This is not a required field.
•
Activate—Click to activate the current configuration. A warning displays before
the action occurs.
•
Save As—Click to save the current configuration with a name and description.
The saved configuration will be stored on the HAFM Server and in the Address
Configuration Library. Refer to “
Managing Stored Address Configurations
” on
page 3–20
for information on accessing this library.
•
Cancel—Click to cancel the configuration settings and close the dialog box
without saving. If you click this button after you click Save As, your changes will
be saved and the dialog box will simply close.
To configure, save, and activate port addresses, use the following steps:
1. Choose Addresses from the Configure menu on the menu bar, then choose
Active. The Configure Addresses - “Active” dialog box displays.
Figure 3–8: Configure Addresses - “Active” dialog box
