director product manager user guide
6–5
Optional Features
Installation
To install and enable this option, choose the Configure Feature Key option under the
Product Manager’s Configure menu.
Configuring the Open Systems Management Server
Use these procedures to configure the open systems inband management program to
function with the switch.
The optional Open Systems Management Server feature must be installed in order to
perform this procedure.
To configure open systems management server, use the following steps:
1. Choose Configure > Management Server from the Product Manager window.
The Configure Open Systems Management Server dialog box displays, as
shown in
Figure 6–2
.
Figure 6–2: Configure Open Systems Management Server dialog box
2. Enable the management server when you click the Enable Management Server
check box. (To disable the management server, click the check box again to
remove the check mark.)
3. Click the check box in the Host Control Prohibited field to display a check mark
and to prohibit the host management program from changing configuration and
connectivity parameters on the switch. In this case, the host program has
read-only access to configuration and connectivity parameters. Click the check
box when it contains a check mark removes the check mark and allows a host
program to change configuration and connectivity parameters on the switch.
4. To activate changes and close the dialog box, click Activate.
5. If you are finished configuring the switch, you can back up the configuration data.
