manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

A–29

Information and Error Messages

This feature is not 
installed. Please 
contact your sales 
representative.

This feature is not 
supported in this 
software version.

Contact your sales 
representative.

The optical 
transceiver is not 
installed.

The maximum 
number of saved 
address 
configurations has 
been reached.

Delete configurations no 
longer needed to allow new 
configurations to be saved.

This feature has not 
been installed. 
Please contact your 
sales 
representative.

Indicator that the 
feature has not been 
installed on this 
switch.

Contact your sales 
representative to obtain the 
desired feature.

This feature key 
does not include all 
of the features 
currently installed 
and cannot be 
activated while the 
switch is online.

The feature set 
currently installed for 
this system contains 
features that are not 
being installed with 
the new feature key. 
To activate the new 
feature key, you must 
set the switch offline. 
Activating the new 
feature set, however, 
will remove current 
features not in the 
new feature set.

Set the switch offline through 
the Set Online State dialog 
box, then activate the new 
feature key using the 
Configure Feature Key 
dialog box.

This feature key 
does not include all 
of the features 
currently installed. 
Do you want to 
continue with 
feature key 
activation?

The feature set 
currently installed for 
this system contains 
features that are not 
being installed with 
the new feature key. 

Click Yes to activate the 
feature key and remove 
current features not in the 
new feature set or No to 
cancel.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Dragon Systems DRAGON NATURALLYSPEAKING ESSENTIALS Quick Start Manual preview
DRAGON NATURALLYSPEAKING ESSENTIALS
Brand: Dragon Systems Pages: 26
F-SECURE Internet Gatekeeper Administrator'S Manual preview
Internet Gatekeeper
Brand: F-SECURE Pages: 414
Paradyne 8922 Installation And User Manual preview
8922
Brand: Paradyne Pages: 24
ZyXEL Communications NetAtlas Workgroup User Manual preview
NetAtlas Workgroup
Brand: ZyXEL Communications Pages: 242
Navman Smart V3 User Manual preview
Smart V3
Brand: Navman Pages: 53
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Brand: Juniper Pages: 14
Oracle Application Server 10.1.3.4 User Manual preview
Application Server 10.1.3.4
Brand: Oracle Pages: 170
TANDBERG ANALYTICS EXTENSION - Administrator'S Manual preview
ANALYTICS EXTENSION -
Brand: TANDBERG Pages: 36
LXE 1280 Reference Manual preview
1280
Brand: LXE Pages: 260
UNIBLUE DISKRESCUE 2009 - V1 Manual preview
DISKRESCUE 2009 - V1
Brand: UNIBLUE Pages: 26
Xerox DocuPrint 100MX User Manual preview
DocuPrint 100MX
Brand: Xerox Pages: 74
Colorbyte Software 2000/XP Quick Start Manual preview
2000/XP
Brand: Colorbyte Software Pages: 11
Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual preview
ThinkCentre Edge 71z
Brand: Lenovo Pages: 182
Xerox 850DP - Phaser Color Solid Ink Printer User Manual preview
850DP - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 61
FARONICS POWER SAVE MAC Product Data Sheet preview
POWER SAVE MAC
Brand: FARONICS Pages: 2
urmet domus 1083/58 Manual preview
1083/58
Brand: urmet domus Pages: 14
Sybase Replication Server 15 Installation Manual preview
Replication Server 15
Brand: Sybase Pages: 74
Mustek 1200 UB PLUS - TWAIN DIALOG BOX User Manual preview
1200 UB PLUS - TWAIN DIALOG BOX
Brand: Mustek Pages: 23

Brands by name

Popular brands

Load more brands