manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

A–12

director product manager user guide

Information and Error Messages

Device applications 
should be 
terminated before 
starting 
diagnostics. Press 
NEXT to continue.

Port diagnostics 
(loopback tests) 
cannot be performed 
on a port while an 
attached device 
application is 
running.

Terminate the device 
application and perform 
diagnostics again.

[device WWN] 
cannot be removed 
from the Switch 
Membership List 
while participating 
in Switch Binding. 
The device must be 
isolated from the 
switch, or Switch 
Binding deactivated 
before it can be 
removed.

User attempted to 
remove a device 
WWN from the 
Switch Membership 
List (SANtegrity 
feature) while Switch 
Binding is enabled. 

Remove the device from the 
switch by blocking the port, 
setting the switch offline, or 
disabling Switch Binding 
through the Switch Binding 
Change State dialog box 
before removing devices from 
the Switch Membership 
List.

Director clock alert 
mode must be 
cleared before 
enabling period 
synchronization.

Clock alert mode is 
enabled through the 
Configure FICON 
Management Server 
dialog box and user is 
attempting to enable 
Periodic Date/Time 
Synchronization 
through the 
Configure Date and 
Time dialog box. 

Disable clock alert mode 
through the Configure 
FICON Management Server 
dialog box.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Canon PowerShot SX1 IS Software Manual preview
PowerShot SX1 IS
Brand: Canon Pages: 48
Canon VB-M40 Viewer Operation Manual preview
VB-M40
Brand: Canon Pages: 2
VegaStream Vega Gateway Engineer'S Manual preview
Vega Gateway
Brand: VegaStream Pages: 33
Novation V-Station User Manual preview
V-Station
Brand: Novation Pages: 93
National Instruments NI-DNET User Manual preview
NI-DNET
Brand: National Instruments Pages: 86
AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Brand: AMIGOPOD Pages: 23
AMIGOPOD AMIGOPOD Integration Manual preview
AMIGOPOD
Brand: AMIGOPOD Pages: 47
Apricorn SMART-ER User Manual preview
SMART-ER
Brand: Apricorn Pages: 20
Apricorn EZ Gig II User Manual preview
EZ Gig II
Brand: Apricorn Pages: 67
VDO TIS OFFICE Brochure preview
TIS OFFICE
Brand: VDO Pages: 8
GRASS VALLEY AURORA BROWSE 7 Datasheet preview
AURORA BROWSE 7
Brand: GRASS VALLEY Pages: 4
Autodesk AUTOCAD PANDID Brochure preview
AUTOCAD PANDID
Brand: Autodesk Pages: 6
Autodesk 23802-091408-9020 - PSG Dwf Composer 2 Tips And Tricks Manual preview
23802-091408-9020 - PSG Dwf Composer 2
Brand: Autodesk Pages: 12
Mackie C4 Commander Programming Manual preview
C4 Commander
Brand: Mackie Pages: 12
KAPERSKY ANTI-VIRUS 5.6 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 130
KAPERSKY SECURITY - FOR PDA 5.0 User Manual preview
SECURITY - FOR PDA 5.0
Brand: KAPERSKY Pages: 153
HighPoint RAID Managemen Interface Manual preview
RAID Managemen
Brand: HighPoint Pages: 28
DAVIS WeatherLink APRS Addendum preview
WeatherLink APRS
Brand: DAVIS Pages: 8

Brands by name

Popular brands

Load more brands