manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

2–26

director product manager user guide

Monitoring and Managing the Director

The Port List View displays the following information on all ports that can be 
installed in the director. All information is updated automatically.

•

#—The physical port number, from 0-63 on the Director 2/64, and 0-127 and 
132-143 on the Director 2/140. Note that for the Director 2/140, ports 128-131 are 
internal ports and not available for external connections.

•

Addr (S/390 mode only)—Displays the logical address of the port. The address 
equals the port number, plus 4. For example, the address for port 0 is 4 (0+4). If 
port addresses have been swapped, those addresses will be followed by an 
asterisk (*).

NOTE:  This column applies during S/390 mode only and does not display during Open 
Systems mode. 

•

Name—Displays the port name as configured through the Configure Ports 
dialog box.

•

Block Config—Indicates the blocked or unblocked configuration of the port as set 
through:

— The Configure Ports dialog box.

— The Block Port option is available through port right-click menus in the Port 

Card View and the Block All Ports option on the port card’s right-click 
menus in the Port Card View and Hardware View. 

— The Block Port option is also available on the port row right-click menus in 

the Port List View, the port bar graph right-click menus in the Performance 
View, and the Port secondary menu of the Product menu on the menu bar.

Blocked states are:

— Blocked: Devices communicating with the port are prevented from logging 

into the director or communicating with other devices attached to director 
ports. A blocked port continuously transmits OLS.

— Unblocked: Devices communicating with the port can log into the director 

and communicate with devices attached to any other unblocked port in the 
same zone.

•

State—The following port operational states may display in this table. For more 
information on these states and corresponding status symbol and LED indicator 
operations in the Hardware View, see “

Port Operational States

” on 

page 2–41

.

— No Light

— Online

— Offline

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Yamaha HUB Owner'S Manual preview
HUB
Brand: Yamaha Pages: 43
ScanSoft DRAGON NATURALLYSPEAKING 7 User Manual preview
DRAGON NATURALLYSPEAKING 7
Brand: ScanSoft Pages: 222
KAPERSKY ANTI-VIRUS BUSINESS OPTIMAL Manual preview
ANTI-VIRUS BUSINESS OPTIMAL
Brand: KAPERSKY Pages: 31
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
PS Audio PowerPlay Programming Manual preview
PowerPlay
Brand: PS Audio Pages: 6
Amanda Work.Group/Windows 3 User Manual preview
Work.Group/Windows 3
Brand: Amanda Pages: 106
Am Mini-SOHO Quick Setup Manual preview
Mini-SOHO
Brand: Am Pages: 14
TRENDnet VIP-L16 - Installation Manual preview
VIP-L16 -
Brand: TRENDnet Pages: 21
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Brand: Access Pages: 16
FieldServer FS-8700-70 Driver Manual preview
FS-8700-70
Brand: FieldServer Pages: 14
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Brand: MACROMEDIA Pages: 168
LXE 1280 Reference Manual preview
1280
Brand: LXE Pages: 260
Navman SmartST SmartST Professional User Manual preview
SmartST SmartST Professional
Brand: Navman Pages: 60
Samsung SCX 6322DN - B/W Laser - All-in-One Manual preview
SCX 6322DN - B/W Laser - All-in-One
Brand: Samsung Pages: 40
Panasonic WORKIO DP-1810 Operating Instructions Manual preview
WORKIO DP-1810
Brand: Panasonic Pages: 78
Canon Digital Video Software (Macintosh) Ver.11 Instruction Manual preview
Digital Video Software (Macintosh) Ver.11
Brand: Canon Pages: 56
Canon iR2270 Series User Manual preview
iR2270 Series
Brand: Canon Pages: 84
Canon DV Messenger Instruction Manual preview
DV Messenger
Brand: Canon Pages: 92

Brands by name

Popular brands

Load more brands