manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

5–5

Using Maintenance Features

Manage Firmware Versions

Firmware refers to the internal operating code for the director. You can maintain up to 
eight firmware versions on the HAFM server for downloading to a director. To use the 
Firmware Library option to manage firmware versions, follow the steps in the hp 
StorageWorks director 2/64 service manual for the Director 2/64 and the hp 
StorageWorks director 2/140 service manual for the Director 2/140.

Enable E-Mail Notification

E-mail addresses and the simple mail transfer protocol (SMTP) server address for 
e-mail notification of director events must be configured through the HAFM 
application. Refer to the hp StorageWorks ha-fabric manager user guide for 
instructions on configuring e-mail.

NOTE:  E-mail recipients are configured in the HAFM application through the Configure E-Mail 
dialog box. A valid SMTP address is configured in this dialog box.

Use the Enable E-Mail Notification function on the Product Manager to enable e-mail 
notification for events that occur on a selected director. The default state is disabled.

To enable e-mail notification, use the following steps:

1. Choose Enable E-Mail Notification from the Maintenance menu on the menu 

bar.

2. To enable e-mail notification, choose the option to add a check mark to the check 

box.

3. To disable e-mail notification, choose the option to remove the check mark from 

the check box.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
Xerox DocuPrint N4025 User Manual preview
DocuPrint N4025
Brand: Xerox Pages: 129
Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual preview
20032623 - Endpoint Protection Small Business Edition
Brand: Symantec Pages: 351
Primera PrimoDVD User Manual preview
PrimoDVD
Brand: Primera Pages: 19
Casio EMULATOR FX-ES User Manual preview
EMULATOR FX-ES
Brand: Casio Pages: 18
ASCOM DURAALARM - 1 Brochure preview
DURAALARM - 1
Brand: ASCOM Pages: 28
IBM Tivoli ADSTAR User Manual preview
Tivoli ADSTAR
Brand: IBM Pages: 62
Siemens IEEE802.11 Tutorial preview
IEEE802.11
Brand: Siemens Pages: 84
DeLorme Street Atlas USA 2011 User Manual preview
Street Atlas USA 2011
Brand: DeLorme Pages: 265
Acroprint Attendance Rx User Manual preview
Attendance Rx
Brand: Acroprint Pages: 61
DigiDesign Trillium Lane Labs Manual preview
Trillium Lane Labs
Brand: DigiDesign Pages: 114
Oracle B31540-02 Implementation Manual preview
B31540-02
Brand: Oracle Pages: 110
ICP GDTMON Manual preview
GDTMON
Brand: ICP Pages: 60
Xerox DocuColor 30 Pro Manual preview
DocuColor 30 Pro
Brand: Xerox Pages: 292
Samsung 3561ND - B/W Laser Printer Manual preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 30
Waves PuigTec MEQ-5 User Manual preview
PuigTec MEQ-5
Brand: Waves Pages: 16
Samsung EASYGSM GH68-60751A Owner'S Manual preview
EASYGSM GH68-60751A
Brand: Samsung Pages: 14
MACROMEDIA FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE SERVICE Manuallines preview
FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE SERVICE
Brand: MACROMEDIA Pages: 48

Brands by name

Popular brands

Load more brands