manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

3–23

Configuring the Director

c.

Type the IP address or DNS host name of the trap recipient (SNMP 
management workstation) in the associated Trap Recipient field. Use 64 or 
fewer alphanumeric characters. Hewlett-Packard recommends using the IP 
address.

Figure 3–10:  Configure SNMP dialog box

d. Type a decimal user datagram protocol (UDP) port number in the associated 

UDP Port Number field. (This number is commonly 162.)

2. To enable transmission of trap messages to configured SNMP management 

workstations, click Enable Authorization Traps. A check mark displays in the 
box when transmission is enabled.

3. Click Activate to save the information and close the dialog box.

4. If you are finished configuring the director, back up the configuration data. For 

more information, refer to “

Backup and Restore Configuration

” on 

page 5–6

.

Configuring Open Systems Management Server

For complete procedures on configuring this optional feature, refer to “

Configuring 

the Open Systems Management Server

” on 

page 6–5

.

Configuring FICON Management Server

For complete procedures on configuring this optional feature, refer to “

Configuring 

the FICON Management Server

” on 

page 6–2

.

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

COMPRO COMPRODVD2 User Manual preview
COMPRODVD2
Brand: COMPRO Pages: 18
National Instruments NI Spectral Measurements Toolkit User Manual preview
NI Spectral Measurements Toolkit
Brand: National Instruments Pages: 35
APPLIED ACOUSTICS SYSTEMS ULTRA ANALOG User Manual preview
ULTRA ANALOG
Brand: APPLIED ACOUSTICS SYSTEMS Pages: 60
Red Hat NETWORK 4.1.0 - Manual preview
NETWORK 4.1.0 -
Brand: Red Hat Pages: 40
Elecard Converter Studio User Manual preview
Converter Studio
Brand: Elecard Pages: 76
3Ware OpenSolaris User Manual preview
OpenSolaris
Brand: 3Ware Pages: 11
MACROMEDIA FLASHLITE2 ACTIONSCRIPT-LANGUAGE Reference preview
FLASHLITE2 ACTIONSCRIPT-LANGUAGE
Brand: MACROMEDIA Pages: 780
NEC Storage Manager Reference preview
Storage Manager
Brand: NEC Pages: 134
Canon Powershot 500 Instruction Manual preview
Powershot 500
Brand: Canon Pages: 102
D-Link DSN-210-SW - SureSync Continuous Data... Datasheet preview
DSN-210-SW - SureSync Continuous Data...
Brand: D-Link Pages: 4
Handmark WordSmith 2.2 User Manual preview
WordSmith 2.2
Brand: Handmark Pages: 70
Novell SERVICE DESK - INSTALLATION V6.1 Installation Manual preview
SERVICE DESK - INSTALLATION V6.1
Brand: Novell Pages: 18
Brother PE-Design Next Installation Manual preview
PE-Design Next
Brand: Brother Pages: 16
Brother PE-DESIGN V7 Instruction Manual preview
PE-DESIGN V7
Brand: Brother Pages: 361
Brother PEDESIGN 7.0 Quick Reference Manual preview
PEDESIGN 7.0
Brand: Brother Pages: 50
HP StorageWorks 2/140 - Director Switch Service Manual preview
StorageWorks 2/140 - Director Switch
Brand: HP Pages: 396
M-Audio ProjectMix Control Manual preview
ProjectMix
Brand: M-Audio Pages: 7
M-Audio M-Tron Manual preview
M-Tron
Brand: M-Audio Pages: 14

Brands by name

Popular brands

Load more brands