manualshive.com logo in svg

HP StorageWorks 2/140 - Director Switch, Product Manager Manual

The HP StorageWorks 2/140 - Director Switch is a versatile storage solution that offers high-performance and scalability. Need help getting started? You can easily access the comprehensive user manual for free on manualshive.com. Get step-by-step instructions on installation, maintenance, and troubleshooting, ensuring optimal usage of this outstanding storage solution.

Share
Download
background image

director product manager user guide

A–11

Information and Error Messages

Could not remove 
dump files from 
server.

Dump files could not 
be deleted from the 
HAFM server 
because the link may 
be down or the 
notebook PC or 
Product Manager 
application is busy.

Retry the operation later. If 
the condition persists, contact 
the next level of support.

Could not stop port 
diagnostics.

Port diagnostics 
could not be stopped 
by the Product 
Manager application 
because the Ethernet 
link is down or busy, 
or because the 
director is busy.

Retry the operation later. If 
the condition persists, contact 
the next level of support.

Could not write 
firmware to flash.

A firmware version 
could not be written 
from the HAFM 
server to FLASH 
memory on the 
director’s CTP card.

Retry the operation again. If 
the condition persists, contact 
the next level of support.

CUP name and port 
name are identical

Within the address 
configuration, one or 
more of the port 
names are the same 
as the CUP name.

Make sure all names are 
unique for the ports and CUP 
name.

Date entered is 
invalid.

The date is entered 
incorrectly at the 
Configure Date and 
Time dialog box. 
Individual field entries 
may be correct, but 
the overall date is 
invalid (for example, a 
day entry of 31 for a 
30-day month).

Verify each entry is valid and 
consistent.

Table A–1:  Product Manager Messages  (Continued)

Message Description

Action

Summary of Contents for StorageWorks 2/140 - Director Switch





















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 2/140 - Director Switch

Garmin GPSMAP GPSMAP 196 Getting Started preview
GPSMAP GPSMAP 196
Brand: Garmin Pages: 4
Garmin MapSource Owner'S Manual preview
MapSource
Brand: Garmin Pages: 2
VeriFone GemStall User Manual preview
GemStall
Brand: VeriFone Pages: 25
TC Electronic RESTORATION SUITE User Manual preview
RESTORATION SUITE
Brand: TC Electronic Pages: 31
ITech IT9000 Installation Instruction preview
IT9000
Brand: ITech Pages: 22
M-Audio Heavy Guitars Quick Start Manual preview
Heavy Guitars
Brand: M-Audio Pages: 4
IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual preview
E16RMLL-I - Tivoli Storage Manager
Brand: IBM Pages: 828
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Service Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 32
Sony D-NE1 - Portable Cd Player Service Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 34
Sony D-NE326CK - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 35
Sony D-NE1 - Portable Cd Player Operating Instructions Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 116
Sun Microsystems Sun GlassFish EnterpriseServer v3 Prelude Troubleshooting Manual preview
Sun GlassFish EnterpriseServer v3 Prelude
Brand: Sun Microsystems Pages: 48
Sun Microsystems Sun StorEdge Availability Suite 3.2 Troubleshooting Manual preview
Sun StorEdge Availability Suite 3.2
Brand: Sun Microsystems Pages: 52
Kinoma CLIE PEG-TJ27 Quick Start Manual preview
CLIE PEG-TJ27
Brand: Kinoma Pages: 6
GameShark Media Manager Instruction Manual preview
Media Manager
Brand: GameShark Pages: 15

Brands by name

Popular brands

Load more brands