7. Click Save to save the settings.
7.10.14 Set Room No.
Set the device type, community No., building No., floor No., and
unit No., and room No.
Click Maintenance and Management → Device to enter the
device list.
Press CTRL and click to enter the remote configuration page.
Click Other → Device Room No. and Set the device type,
community No., building No., floor No., and unit No., and room
No.
7.10.15 Configure Video and Audio Parameters
You can set the device camera's image quality, resolution and
other parameters.
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Image → Video & Audio to enter the settings page.
4. Set the device camera's parameters, including the stream type,
the bitrate type, the video quality, the frame rate, the audio
encoding type, the video type, the bitrate, the resolution, and
the I frame interval.
5. Click Save.
7.10.16 Configure Volume Input or Output
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Image → Volume Input/Output to enter the Configuring
the Volume Input or Output page.
4. Set the device input volume or output volume.
5. Click Save.
7.10.17 View Relay Status
Click Maintenance and Management → Device to enter the
device list.
Press CTRL and click to enter the remote configuration page.
Click Status → Relay and you can view the relay status.
122
