Figure 7-3 Select Card Reader Authentication Mode
Note
PIN refers to the PIN code set to open the door. Refer to
Configure Access Control Information.
2) Check the modes in the Available Mode list and they will be
added to the selected modes list.
3) Click OK.
After selecting the modes, the selected modes will display as
icons with different color.
4. Click the icon to select a card reader authentication mode, and
drag the cursor to draw a color bar on the schedule, which
means in that period of time, the card reader authentication is
valid.
5. Repeat the above step to set other time periods.
Figure 7-4 Set Authentication Modes for Card Readers
6. Optional: Select a configured day and click Copy to Week to
copy the same settings to the whole week.
7. Optional: Click Copy to to copy the settings to other card
readers.
8. Click Save.
7.5.6 Configure First Person In
You can set multiple first persons for one access control point.
After the first person is authorized, it allows multiple persons
access the door or other authentication actions.
79
