On the Home page, tap System (System Settings) to enter the
System Settings page.
Figure 6-11 Basic Parameters
Table 6-1 Basic Parameters
Parameter
Description
Community
No.
Set the device installed community No.
Building No. Set the device installed building No.
Unit No.
Set the device installed Unit No.
Voice
Prompt
Tap or to disable or enable the
voice prompt.
Voice
Volume
Adjust the voice volume. The larger the
value, the louder the volume.
Application
Mode
You can select either others or indoor
according to actual environment.
Wake-up
Distance
The live view on the device screen will
enter the IR mode.
IR Light
Brightness
Set the IR light brightness when the IR
light is enabled.
White Light
Brightness
Set the supplement white light's
brightness. The brightness ranges from 0
to 100.
0 refers to turning off the light. 1 refers
to the darkest, and 100 refers to the
brightest
6.8.2 Set Face Picture Parameters
You can set the face 1:N security level, 1:1 security level,
recognition interval, live face detection, liveness security level,
margin (left), margin (top), margin (right), margin (bottom), pitch
angle, yaw angle, pupillary distance, WDR level, and ECO mode.
On the Home page, tap System (System Settings) to enter the
System Settings page.
32
