Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. Click Add Face in the Basic Information panel.
4. Select Remote Collection.
5. Select an access control device which supports face recognition
function from the drop-down list.
6. Collect face.
1) Face to the camera of the selected access control device and
make sure your face is in the middle of the collecting
window.
2) Click to capture a photo.
3) Click OK to save the captured photo.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons .
7.2.7 Collect Fingerprint via Client
Collecting fingerprints locally means you can collect the
fingerprint via the fingerprint recorder connected directly to the
PC running the client. The fingerprints recorded can be used as
credentials of the persons to access the authorized doors.
Before You Start
Connect the fingerprint recorder to the PC running the client.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. In the Credential → Fingerprint panel, click +.
4. In the pop-up window, select the collection mode as Local.
5. Select the model of the connected fingerprint recorder.
Note
If the fingerprint recorder is DS-K1F800-F, you can click Settings
to select the COM the fingerprint recorder connects to.
6. Collect the fingerprint.
1) Click Start.
2) Place and lift your fingerprint on the fingerprint recorder to
collect the fingerprint.
3) Click Add to save the recorded fingerprint.
7. Confirm to add the person.
57
