For some devices, you are required to create the password to
activate them before they can be added to the software and work
properly.
Steps
Note
This function should be supported by the device.
1. Enter the Device Management page.
2. Click on the right of Device Management and select Device.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and
select an inactive device.
5. Click Activate to open the Activation dialog.
6. Create a password in the password field, and confirm the
password.
Caution
The password strength of the device can be automatically
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case letters,
lower case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better
protect your product.
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
7. Click OK to activate the device.
6 Basic Operation
6.1 Set Application Mode
After activating the device, you should select an application mode
for better device application.
Steps
1. On the Welcome page, select Indoor or Others from the drop-
down list.
16
