Figure 3-9 Install Mounting Plate
5. Remove the two screws on the rear panel and remove the
sheet to display the wiring terminals.
6. Route the cable through the cable hole of the mounting plate,
and connect to corresponding external devices' cables.
7. Install the sheet back to the device with the two screws.
8. Apply Silicone sealant among the cable wiring area to keep the
raindrop from entering.
Figure 3-10 Apply Silicone Sealant
9. Insert the fingerprint module to the holes at the bottom of the
main part.
Figure 3-11 Install Fingerprint Module
10. Align the device with the mounting plate and hang the device
on the mounting plate.
9
