View the number of existed fingerprints in the device.
Fingerprint Recognition Level
Select the fingerprint recognition level from the drop-down
list.
Face Recognition Timeout Value
If the recognition time is more than the configured time, the
device will remind you.
Face 1:N Matching Threshold
Set the matching threshold when authenticating via 1:N
matching mode. The larger the value, the smaller the false
accept rate and the larger the false rejection rate when
authentication.
Face Recognition Interval
The time interval between two continuous face recognitions
when authenticating.
Live Face Detection
Enable or disable the live face detection function. If enabling
the function, the device can recognize whether the person is
a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authenticating via 1:1
matching mode. The larger the value, the smaller the false
accept rate and the larger the false rejection rate when
authentication.
Application Mode
You can select indoor or others application modes according
to actual environment.
Lock Authentication Failed Face
After enabling the Live Face Detection function, the system
will lock the user's face for 5 minutes if the live face
detection is failed for more than the configured attempts.
The same user cannot authenticate via the fake face within 5
minutes. Within the 5 minutes, the user can authenticate via
the real face twice continuously to unlock.
Live Face Detection Security Level
After enabling Live Face Detection function, you can set the
matching security level when performing live face
authentication.
Max. Failed Attempts for Face Auth.
Set the maximum live face detection failed attempts. The
system will lock the user's face for 5 minutes if the live face
detection is failed for more than the configured attempts.
The same user cannot authenticate via the fake face within 5
minutes. Within the 5 minutes, the user can authenticate via
the real face twice continuously to unlock.
4. Click OK.
5. Optional: Click Copy to, and then select the card reader(s) to
copy the parameters in the page to the selected card reader(s).
Configure Parameters for Alarm Output
After adding the access control device, if the device links to alarm
outputs, you can configure the parameters.
73
