Note
By default, Attendance Status Required is enabled.
6. Set available time for the target attendance status.
1) Move the cursor on the target time and the enable checkbox
will display.
2) Check the checkbox and set the available time.
3) Click anywhere on the page to confirm the settings. The
configured time will be displayed in white.
7. Set shortcut key from the drop-down list for the attendance
status.
8. Click Save.
The attendance status will be valid within the configured time
duration.
Result
Enter the device initial page, the current attendance mode will be
displayed on the page. When you authenticate on the initial page,
the authentication will be marked as the configured attendance
status according to the configured time.
Example
If set the Up key as check in and the Down key as check out, and
set the check in's schedule as Monday 08:00, and check out's
schedule as Monday 17:00, the valid person's authentication
before 17:00 on Monday will be marked as check in. And the valid
person's authentication after 17:00 on Monday will be marked as
check out.
Set Manual Attendance
Set the attendance mode as manual, and you can select a status
manually when you take attendance on the device.
Before You Start
Add at least one person, and set the person's authentication
mode. For details, see Person Management.
Steps
1. Click Access Control → Advanced Function → More
Parameters to enter the More Parameters page.
2. Select a device from the left panel.
3. Click Attendance Status.
4. Set the attendance mode as Manual.
5. Make sure Attendance Status Required is enabled.
Note
By default, Attendance Status Required is enabled.
6. Set shortcut key from the drop-down list for the attendance
status.
7. Click Save.
Result
Press a key on the device keypad to select an attendance status
and authenticate. The authentication will be marked as the
configured attendance status according to the defined shortcut
key.
88
