-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons.
7.2.8 Collect Fingerprint via Access Control Device
When adding person, you can collect fingerprint information via
the access control device's fingerprint module. The fingerprints
recorded can be used as credentials of the persons to access the
authorized doors.
Before You Start
Make sure fingerprint collection is supported by the access
control device.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. In the Credential → Fingerprint panel, click +.
4. In the pop-up window, select the collection mode as Remote.
5. Select an access control device which supports fingerprint
recognition function from the drop-down list.
6. Collect the fingerprint.
1) Click Start.
2) Place and lift your fingerprint on the fingerprint scanner of
the selected access control device to collect the fingerprint.
3) Click Add to save the recorded fingerprint.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons .
7.2.9 Configure Access Control Information
When adding a person, you can set her/his access control
properties, such as setting the person as visitor or as blacklist
person, or as super user who has super authorization.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. In the Access Control panel, set the person's access control
properties.
PIN Code
58
