another files, named enroll_pic1, enroll_pic2, enroll_pic3,
enroll_pic4, under the root directory.
• Under the deep mode (face recognition mode), the
imported pictures should be exported pictures of another
device.
• The employee ID should be less than 32 characters. It can be
a combination of lower letters, upper letters, and numbers.
It should not be duplicated, and should not start with 0.
• Requirements of face picture should follow the rules below:
It should be taken in full-face view, directly facing the
camera. Do not wear a hat or head covering when taking the
face picture. The format should be JPEG or JPG. The
resolution should be 640 × 480 pixel or more than of 640 ×
480 pixel. The picture size should be between 60 KB and 200
KB.
6.7 Identity Authentication
After network configuration, system parameters configuration
and user configuration, you can go back to the initial page for
identity authentication. The system will authenticate person
according to the configured authentication mode.
You can authenticate identity via 1:1 matching or 1:N matching.
1:N Matching
Compare the captured face picture or the collected fingerprint
picture with all face pictures or all fingerprint pictures stored in
the device.
1: 1 Matching
Compare the captured face picture or the collected fingerprint
picture with all face pictures or all fingerprint pictures stored in
the device.
6.7.1 Authenticate via 1:1 Matching
Steps
1. If the authentication mode is Card and Face, Card and Face and
Fingerprint, swipe card in the card swiping area.
Note
If the QR Code Scanning function is enabled, you can put the
QR code in front of the device camera to authenticate via QR
code.
2. Continue authentication.
-
If the authentication mode is Card and Face, position the
face looking at the camera to authenticate face.
-
If the authentication mode is Card and Face and Fingerprint,
after authenticating face completely, authenticate the
fingerprint on the fingerprint module when the prompt
"Continue to authenticate" pops up.
30
