manualshive.com logo in svg

HIKVISION DS-K1T607E, User Manual

Share
Download
HIKVISION DS-K1T607E User Manual Download Page 59

2. Run the client software and the control panel of the software

pops up.

3. Click Device Management to enter the Device Management

interface.

4. Add the master station and the device to the client software.

Note

For details about adding device, see Add Device.

5. Set the master station's IP address and SIP address in the

remote configuration page.

Note

For details about the operation, see the user manual of the

master station.

6. Answers the call via the master station and starts two-way

audio.

Note

The device will call the master station in priority when tap   .

6.13.3 Call Device from Client Software

Steps

1. Get the client software from the supplied disk or the official

website, and install the software according to the prompts.

2. Run the client software and the control panel of the software

pops up.

3. Click Device Management to enter the Device Management

page.

4. Add the device to the client software.

Note

For details about adding device, see Add Device.

5. Enter the Live View page and double-click the added device to

start live view.

Note

For details about operations in the Live View page, see Live

View in the user manual of the client software.

6. Right click the live view image to open the right-click menu.
7. Click Start Two-Way Audio to start two-way audio between the

device and the client software.

6.13.4 Call Indoor Station from Device

Steps

1. Get the client software from the supplied disk or the official

website, and install the software according to the prompts.

2. Run the client software and the control panel of the software

pops up.

3. Click Device Management to enter the Device Management

interface.

44

Summary of Contents for DS-K1T607E















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands