You can enter 0 or 1 which indicated different adding modes.
0 indicates that the device is added by IP address or domain
name; 1 indicates that the device is added via EHome.
Address
Edit the address of the device. If you set 0 as the adding
mode, you should enter the IP address or domain name of
the device; if you set 1 as the adding mode, this filed is not
required.
Port
Enter the device port No. The default value is 8000.
Device Information
If you set 0 as the adding mode, this field is not required. If
you set 1 as the adding mode, enter the EHome account.
User Name
Enter the device user name. By default, the user name is
admin.
Password
If you set 0 as the adding mode, enter the password. If you
set 1 as the adding mode, enter the EHome key.
Caution
The password strength of the device can be automatically
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper
case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
And we recommend you reset your password regularly,
especially in the high security system, resetting the
password monthly or weekly can better protect your
product.
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
Import to Group
You can enter 1 to create a group by the device name. All the
channels of the device will be imported to the
corresponding group by default. 0 indicates disabling this
function.
6. Click and select the template file.
7. Click Add to import the devices.
7.1.2 Reset Device Password
If you forgot the password of the detected online devices, you
can reset the device password through the client.
Steps
1. Enter Device Management page.
2. Click Online Device to show the online device area.
All the online devices in the same subnet will display in the list.
3. Select the device from the list and click on the Operation
column.
52
