The user information verification is compatible with the old
client software version when logging in.
Encryption Mode
High security level during the user information verification
when logging in.
6. Optional: Check Enable SSH.
7. Click Save.
7.10.8 Configure Network Parameters
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Network → General .
You can configure the NIC type, the IPv4 address, the subnet
mask (IPv4), the default gateway (IPv4), MTU, and the device
port.
4. Click Save.
7.10.9 Configure Advanced Network
Click Maintenance and Management → Device to enter the
device list.
Press CTRL and click to enter the remote configuration page.
Click Network → Advanced Settings and you can configure the
DNS IP address 1 and the DNS IP address.
Click Save to save the settings.
7.10.10 Configure Wi-Fi
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2. Press CTRL and click to enter the remote configuration page.
3. Click Network → Wi-Fi .
4. Check Enable to enable the Wi-Fi function.
5. Input the hot spot name or you can click Select... to select a
network.
6. Input the Wi-Fi password.
7. Optional: Click Refresh to refresh the network status
8. Optional: Select the NIC Type.
9. Optional: Select to uncheck Enable DHCP and set the IP
address, the subnet mask, the default gateway, the MAC
address, the DNS1 IP Address, and the DNS2 IP address.
10. Click Save.
7.10.11 Configure SIP Parameters
Set the master station's IP address and the SIP server's IP address.
After setting the parameters, you can communicate among the
access control device, door station, indoor station, master station,
and the platform.
119
